86-21-66057753
Room 507, Block 2, Lane 423, Xincun Road, Putuo Dist., Shanghai, China (Mainland)
FEATURES
THREE FORMATS 24W 700MM LONG, 48W 1310MM LONG, 72W 1610MM LONG.
LER = 102LM/W CCT = 4000K CRI>80.
ENERGY EFFICIENT LED BOARDS INTEGRATED ELECTRonICS AND DIFFUSE LENS
50,000 HOURS AVERAGE LAMP LIFE L70
PRESSURE DIE-CAST MARINE GRADE ALUMINIUM BODY WITH A POWDER COATED PAINT FINISH
COMPLETE WITH SECURITY SCREWS, REMOVABLE GEAR TRAY AND SINGLE ONE PIECE GASKET
LOW PROFILE IP66 PROTECTION, IK10
ROBUST FROSTED POLYCARBonATE LENS RESIST IMPACT & ABUSE
OPTIonAL BODY PROFILES AND MOUNTING ACCESSORIES
DUAL ConDUIT ACCESS
AMBIENT TEMPERATURE, -25°C TO 40°C
EMERGENCY VERSIONS AVAILABLE
APPLICATIONS
PRISONS, SUBWAYS, RAILWAY STATIONS AND UNDERGROUND CARPARKS.
CERTIFICATE CERTIFICATE NO.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE BCTC-150911291
CE BCTC-150911292
IP66 BCTC-150911293
ETL 150801588SHA-001
EXN IIC ZONE 2, T5 IP66 N. 0B150930. HECTS73
PRODUCTS QUICK INFORMATION VERSION DIM (MM) MASS (KG)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
HUMMER 24W 700×140×115 2.0
HUMMER 48W 1310×140×115 3.5
HUMMER 72W 1610×140×115 4.0
ACCESSORIES
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
M20 CABLE GLAND
CEILING MOUNT BRACKET
BRACKET 45°
SINPLE PIPE MOUNT BRACKET KITS
UNIVERSAL BRACKET
EXPLODED ASSEMBLY DRAWINGS
SPECIFICATION LIST | HUMMER H1 | HUMMER H2 | HUMMER H3 |
POWER | 24W | 48W | 72W |
NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V |
POWER FACTOR | >0.95 | >0.95 | >0.95 |
PCB CONNECTION | 12SERIES 12PARALLELS | 12SERIES 24PARALLELS | 12SERIES 24PARALLELS |
DRIVER OUTPUT | 32-40V/0.5A | 32-40V/0.5A | 32-40V/0.5A |
CHIPS | EPISTAR 5630 | EPISTAR 5630 | EPISTAR 5630 |
PCB QUANTITY | 2PC | 4PC | 4PC |
CHIP QUANTITY | 144PCS | 288PCS | 288PCS |
CCT | 3000-6000K | 3000-6000K | 3000-6000K |
CRI | >80 | >80 | >80 |
LUMINOUS FLUX | 2472LM | 4896LM | 7344LM |
EFFICIENCT | 103LM/W | 102LM/W | 102LM/W |
BEAM ANGLE | 120° | 120° | 120° |
BODY MATERIAL | ALUMINIUM | ALUMINIUM | ALUMINIUM |
DIFFUSER MATERIAL | PC | PC | PC |
IP RATE | IP44 | IP44 | IP44 |
AMBIENT TEMPERTURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
STORAGE TEMPERATURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
INNER BOX | 710×140×125 | 1320×140×125 | 1650×140×125 |
OUTER BOX | 725×300×390 | 1335×300×390 | 1665×300×270 |
DRAWINGS
PACKING INFORMATION
INSTALLATION OR ASSEMBLY INSTRUCTIONS
PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.
importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. PNQ IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.
“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”
1. PRODUCT SPECIFICATION:
| HUMMER H1 | HUMMER H2 | HUMMER H3 |
TYPE OF PROTECTION CLASS | EXN IIC ZONE 2, T5 | EXN IIC ZONE 2, T5 | EXN IIC ZONE 2, T5 |
IP RATE | IP66 | IP66 | IP66 |
NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V |
LINE CURRENT | 0.5A | 0.5A | 0.5A |
importANT – WHEN INSTALLING ELECTRonIC OR HID LIGHTING EQUIPMENT, THE INSTALLER MUST ConSIDER THE IN-RUSH START CURRENT(IF ANY)AS documentED ON THE ConTROL GEAR IDENTIFICATION LABEL WHEN SELECTING APPROPRIATE CIRCUIT ConTROLS OR PROTECTIVE DEVICES.
POWER FACTOR | >0.95 | >0.95 | >0.95 |
NOMINAL FREQ.(HZ) | 50 | 50 | 50 |
SUITABLE FOR DIRECT MOUNTING ON FLAMMABLE SURFACES | YES | YES | YES |
DIMMABLE(IF RELEVANT REFER BRAND WEB FOR APPROVED LIST) | NO | NO | NO |
MOUNTING: LUMINAIRES SHOULD BE INSTALLED WHERe ACCESS FOR MAINTENANCE IS PRACTICAL AND IN ACCORDANCE WITH ANY LIGHTING DESIGN INFORMATION PROVIDED FOR THE INSTALLATION. THE FOLLOWING MOUNTINGS ARE POSSIBLE.
