86-21-66057753
Room 507, Block 2, Lane 423, Xincun Road, Putuo Dist., Shanghai, China (Mainland)
FEATURES
-VARIOUS SIZE OPTIONS: 300x600, 600x600, 1200x300 AND 1200x600
-HIGH TRANSPARENCY OPAL PMMA DIFFUSER
-SLIMLINE PANEL
-COMPLETE WITH DRIVER, FLEX AND PLUG
-ACCESSORIES AVAILABLE: DEEP SURFACE frame, BRACKETS AND WIRE SUSPENSION KITS
-QUICK AND EASY TO INSTALL
-VARIOUS SIZE OPTIONS PROVIDE MORE FLEXIBILITY
-ELECTRonIC 35,000 HOUR AVERAGE LIFE
-9.5MM PROFILE
-CRI > 82
-BEAM DISTRIBUTION 110°
-IP40, TA40
-DIMMABLE 40W CHINA LED PANEL LIGHT
-3 YEAR WARRANTY
CERTIFICATE
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE ROHS ERP CB SAA ENEC
PRODUCTS QUICK INFORMATION
DIM (MM) POWER MASS (KG)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
295×295×10 20W 0.60
295×595×10 30W 1.20
295×1195×10 36W/40W 2.40
595×595×10 32W/36W/40W 2.40
595×1195×10 70W 4.80
619×619×10 36W/40W 2.60
EXPLODED ASSEMBLY DRAWINGS
40W CHINA LED PANEL LIGHT 600x600
SPECIFICATION
| VERSION(DIM) | 295×295×10MM | 295×595×10MM | 295×1195×10MM |
| POWER | 20W | 30W | 36W/40W |
| NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V |
| POWER FACTOR | >0.95 | >0.95 | >0.95 |
| CCT | 3000-6000K | 3000-6000K | 3000-6000K |
| CRI | >82 | >82 | >82 |
| EFFICIENCT | >85LM/W | >85LM/W | >85LM/W |
| BEAM ANGLE | 110° | 110° | 110° |
| BODY MATERIAL | ALUMINIUM+LGP | ALUMINIUM+LGP | ALUMINIUM+LGP |
| IP RATE | IP40 | IP40 | IP40 |
| AMBIENT TEMPERTURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
| STORAGE TEMPERATURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
| OUTER BOX DIM(MM) | 350×140×190(6PCS) | 350×140×390(6PCS) | 675×140×190(6PCS) |
| VERSION(DIM) | 595×595×10MM | 595×1195×10MM | 619×619×10MM |
| POWER | 32W/36W/40W | 70W | 36W/40W |
| NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V |
| POWER FACTOR | >0.95 | >0.95 | >0.95 |
| CCT | 3000-6000K | 3000-6000K | 3000-6000K |
| CRI | >82 | >82 | >82 |
| EFFICIENCT | >85LM/W | >85LM/W | >85LM/W |
| BEAM ANGLE | 110° | 110° | 110° |
| BODY MATERIAL | ALUMINIUM+LGP | ALUMINIUM+LGP | ALUMINIUM+LGP |
| IP RATE | IP40 | IP40 | IP40 |
| AMBIENT TEMPERTURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
| STORAGE TEMPERATURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
| OUTER BOX DIM(MM) | 650×140×680(6PCS) | 1250×140×690(6PCS) | 675×140×700(6PCS) |
DIMMING SYSTEM
NON-DIMMABLE 0-10V DIM
DALI DIM TRIAC-DIM
PACKING INFORMATION
INSTALLATION OR ASSEMBLY INSTRUCTIONS
PLEASE READ THESE INSTALLATION INSTRUCTIONS FOR 40W CHINA LED PANEL LIGHT CAREFULLY BEFORE INSTALLING OR MAINTAINING THISEQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCEDELECTRICIAN.
importANT – PANEL MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S
INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THISimportANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITECOMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OFSUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITHTHE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THEOPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, ISMAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.
“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”
1. PRODUCT SPECIFICATION:
IP RATE: IP40
NOMINAL VOLTAGE: AC180-240V
2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.
3. INSTALLATION DRAWINGS
4. ELECTRICAL FAULT FINDING AND RELACEMENT FOR 40W CHINA LED PANEL LIGHT 600x600:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING MUST BE DONE BY A FULLY QUALIFIED ELECTRICIAN AND, IF CARRIED OUT WITH THE LUMINAIRE IN PLACE, UNDER A PERMIT TO WORK. WITH REPLACEMENT OF ANY PART ENSURE THAT WIRES AND ConNECTIONS ARE CHECKED, AND ANY WIRE SLEEVING REFITTED.
