86-21-66057753
Room 507, Block 2, Lane 423, Xincun Road, Putuo Dist., Shanghai, China (Mainland)
FESTURES
SHALLOW PROFILE, AVAILABLE IN TWO SIZES
WHITE TRIM, FROSTED POLYCARBonATE DIFFUSER SLIGHTLY BEVELLED BACK FROM THE CEILING LINE WITH A BEAM 90 DEGREE DISTRIBUTION, DIE-CAST.
ALUMINIUM HOUSING.
AVAILABLE IN 3000K AND 4000K OFFERING A CRI OF >80, COME COMPLETE WITH FLEX & PLUG.
THE 9W FORMAT, DEPTH 68MM, Ø200MM.
THE 12W, 18W, 24W FORMAT, DEPTH 80MM, Ø240MM.
REMOTE ConSTANT CURRENT DRIVER TO SUIT EACH FORMAT.
NON DIMMABLE.
AVERAGE LIFE: 35,000 HOURS.
EPISTAR LED TECHNOLOGY.
CERTIFICATE CERTIFICATE NO.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE BCTC-2011009790-SZJR
CE BCTC-2011009791-SZJR
PRODUCTS QUICK INFORMATION VERSION DIM (MM) CEILING HOLE SIZE (MM) MASS (KG)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
SUNFLOWERⅠ 9W Ø200MM Ø180MM 0.90
SUNFLOWERⅡ12W Ø240MM Ø220MM 1.20
SUNFLOWERⅡ18W Ø240MM Ø220MM 1.20
SUNFLOWERⅡ24W Ø240MM Ø220MM 1.20
SUNFLOWERⅠ SUNFLOWERⅡ
SPECIFICATION LIST | SUNFLOWERⅠ9W | SUNFLOWERⅡ12W | SUNFLOWERⅡ18W | SUNFLOWERⅡ24W |
POWER | 9W | 12W | 18W | 24W |
NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V | AC100-240V |
POWER FACTOR | >0.95 | >0.95 | >0.95 | >0.95 |
PCB CONNECTION | 6SERIES 3PARALLELS | 6SERIES 4PARALLELS | 12SERIES PARALLELS | 12SERIES 4PARALLELS |
CHIPS | EPISTAR 5630 | EPISTAR 5630 | EPISTAR 5630 | EPISTAR 5630 |
PCB QUANTITY | 1PCS | 1PCS | 1PCS | 1PCS |
CHIP QUANTITY | 18PCS | 24PCS | 36PCS | 48PCS |
CCT | 3000-6000 | 3000-6000 | 3000-6000 | 3000-6000 |
CRI | >80 | >80 | >80 | >80 |
LUMINOUS FLUX | 857.07LM | 1196.93LM | 1683.82LM | 2235.91LM |
EFFICIENCT | 95.23LM/W | 99.68LM/W | 93.49LM/W | 93.16LM/W |
BEAM ANGLE | 120° | 120° | 120° | 120° |
BODY MATERIAL | ALUMINIUM ADC12 | ALUMINIUM ADC12 | ALUMINIUM ADC12 | ALUMINIUM ADC12 |
DIFFUSER MATERIAL | PMMA | PMMA | PMMA | PMMA |
IP RATE | IP65 | IP65 | IP65 | IP65 |
AMBIENT TEMPERTURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
STORAGE TEMPERATURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
INNER BOX | 220×220×160 | 252×252×160 | 252×252×160 | 252×252×160 |
OUTER BOX | 235×460×835 | 260×520×835 | 260×520×835 | 260×520×835 |
PACKING INFORMATION
1. 220×220×160MM INNER BOX 2. 235×460×835MM OUTER BOX(10 PCS / 1 OUTER BOX)
3. 252×252×160MM INNER BOX 4. 260×520×835MM OUTER BOX(10 PCS / 1 OUTER BOX)
INSTALLATION OR ASSEMBLY INSTRUCTIONS
PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.
importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.
“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”
1. PRODUCT SPECIFICATION:
SPECIFICATION LIST | SUNFLOWERⅠ9W | SUNFLOWERⅡ12W | SUNFLOWERⅡ18W | SUNFLOWERⅡ24W |
NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V | AC100-240V |
IP RATE | IP44 | IP44 | IP44 | IP44 |
2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.
3. INSTALLATION DRAWINGS
STEP 1: DRILL ONE HOLES(Φ180MM HOLE FOR SUN FLOWERⅠ, Φ220MM FOR SUN FLOWER Ⅱ) IN THE CEILING.
STEP 2: ConNECT THE CABLES TO THE TERMINAL BLOCK.
STEP 3: TURN THE CLIPS, THEN PUT THE LAMP IN THE CEILING HOLE.
STEP 4: FINISH.
4. ELECTRICAL FAULT FINDING AND RELACEMENT:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING
