86-21-66057753
Room 507, Block 2, Lane 423, Xincun Road, Putuo Dist., Shanghai, China (Mainland)
FESTURES
DIE CAST ALUMINIUM GEAR HOUSING FINISHED IN GREY POWDER COAT
HIGH QUALITY REFRACTOR PROVIDING EXCELLENT VERTICAL AND HORIZONTAL ILLUMINATION
IDEAL FOR MOUNTING HEIGHTS FROM 5 TO 8M
COMPLETE WITH HOOK, ConTROL GEAR, 1.5M 7.5 AMP, 3 PIN FLAT EARTH, FLEX AND PLUG
HPF GEAR WIRED TO 0.9PF MINIMUM
ACCESSORIES INCLUDE PRISMATIC DROP LENS, ConICAL LENS, FLAT CLEAR LENS, WIRE GUARD
APPLICATIONS
FACTORY, SUPERMARKET
CERTIFICATE CERTIFICATE NO.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE BCTC-2011009558-SZJR
CE BCTC-2011009559-SZJR
IP65 BCTC-2011009792-SZJR
PRODUCTS VERSION DIM (MM) MASS (KG)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CUMMINS 1 100W Ø280MM 4.20
CUMMINS 2 150W Ø350MM 6.60
CUMMINS 3 200W Ø410MM 9.00
CUMMINS 4 300W Ø470MM 13.00
SPECIFICATION LIST | COMMINS 100W | COMMINS 150W | COMMINS 200W | COMMINS 300W |
POWER | 100W | 150W | 200W | 300W |
NOMINAL VOLTAGE | AC180-240V | AC180-240V | AC180-240V | AC180-240V |
POWER FACTOR | >0.95 | >0.95 | >0.95 | >0.95 |
PCB CONNECTION | 4 SERIES 25 PARALLELS | 3 SERIES 50 PARALLELS | 5 SERIES 40 PARALLELS | 6 SERIES 50 PARALLELS |
CHIPS | SAMSUNG 5050 | SAMSUNG 5050 | SAMSUNG 5050 | SAMSUNG 5050 |
PCB QUANTITY | 1PCS | 1PCS | 1PCS | 1PCS |
CHIP QUANTITY | 100PCS | 150PCS | 200PCS | 300PCS |
CCT | 3000-6000K | 3000-6000K | 3000-6000K | 3000-6000K |
CRI | >80 | >80 | >80 | >80 |
LUMINOUS FLUX | 11104.58LM | 16500LM | 21430.64LM | 34200LM |
EFFICIENCT | 111.05LM/W | 110.00LM/W | 107.15LM/W | 114LM/W |
BEAM ANGLE | 120° | 120° | 120° | 120° |
BODY MATERIAL | ALUMINIUM ADC12 | ALUMINIUM ADC12 | ALUMINIUM ADC12 | ALUMINIUM ADC12 |
DIFFUSER MATERIAL | TEMPERED GLASS | TEMPERED GLASS | TEMPERED GLASS | TEMPERED GLASS |
IP RATE | IP65 | IP65 | IP65 | IP65 |
AMBIENT TEMPERTURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
STORAGE TEMPERATURE | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C | -25°C TO 40°C |
PACKING SIZE | 335×325×230 | 380×380×270 | 445×445×270 | 510×520×270 |
PACKING INFORMATION
3. COMMINS 1: 335×325×130MM CARTON COMMINS 2: 380×380×270MM CARTON
COMMINS 3: 445×445×270MM CARTON COMMINS 4 : 510×520×270MM CARTON
INSTALLATION OR ASSEMBLY INSTRUCTIONS
PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.
importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.
“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”
1. PRODUCT SPECIFICATION:
COMMINS 1 | COMMINS 2 | COMMINS 3 | COMMINS 4 | |
IP RATE | IP65 | IP65 | IP65 | IP65 |
NOMINAL VOLTAGE | AC100-240V | AC100-240V | AC100-240V | AC100-240V |
2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.
3. INSTALLATION DRAWINGS
STEP 1: SET THE HOOK IN THE CEILING.
STEP 2: ConNECT THE CABLES.
STEP 3: ConNECT THE HOOKS.
STEP 4: FINISH.
4. ELECTRICAL FAULT FINDING AND RELACEMENT:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING
