86-21-66057753
Room 507, Block 2, Lane 423, Xincun Road, Putuo Dist., Shanghai, China (Mainland)
FEATURES
TOUGH SINGLE PIECE POLYCARBonATE BODY
16MM KNOCK OUT CABLE ENTRY
GASKET IS EASILY REPLACEABLE
SINGLE PIECE, CLEAR PRISMATIC POLYCARBonATE LENS OR TRANSLUCENT OPAL LENS
BOTH DIFFUSERS HAVE SMOOTH EXTERIORS FOR EASY MAINTENANCE
SUPPLIED STANDARD WITH HIGH TEMPERATURE PORCELAIN ES LAMP HOLDER
RATED AVERAGE LIFE OF 35,000 HOURS*, 6000K
AN ENERGY EFFICIENT WEATHER RESISTANT IP66 SYSTEM
APPLICATIONS
STAIRWELLS, WALKWAYS, GENERAL SECURITY, COMMERCIAL, INDUSTRIAL, DOMESTIC LIGHTING, UNDER EAVES AND AWNINGS.
CERTIFICATE CERTIFICATE NO.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE BCTC- 150911288
CE BCTC- 150911289
IP66 BCTC- 150911290
PRODUCTS QUICK INFORMATION VERSION DIM (MM) MASS (KG)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ASTRA 3W NON-MAINTAINED 347 × 108 × 78 0.8
ASTRA 12W MAINTAINED 347 × 108 × 78 0.8
ASTRA SERIES
SPECIFICATION LIST | ASTRA 3W NON-MAINTAINED | ASTRA 12W MAINTAINED |
POWER | 3W | 12W (EMERGENCY POWER: 3W) |
NOMINAL VOLTAGE | AC100-240V | AC100-240V |
POWER FACTOR | >0.95 | >0.95 |
PCB CONNECTION | 5 SERIES 12 PARALLELS | 5 SERIES 12 PARALLELS |
EMERGENCY TIME | 3 HRS | 3 HRS |
CHIPS | SMD 2835 | SMD 2835 |
PCB QUANTITY | 1PC | 1PC |
CHIP QUANTITY | 60 PCS | 60 PCS |
CCT | 3000-6000K | 3000-6000K |
CRI | >80 | >80 |
LUMINOUS FLUX | 285LM | 1140LM |
EFFICIENCT | 95LM/W | 95LM/W |
BEAM ANGLE | 120° | 120° |
BODY MATERIAL | PC | PC |
DIFFUSER MATERIAL | PMMA | PMMA |
IP RATE | IP66 | IP66 |
AMBIENT TEMPERTURE | 25°C TO 40°C | 25°C TO 40°C |
STORAGE TEMPERATURE | 25°C TO 40°C | 25°C TO 40°C |
INNER BOX | 365×115×85 | 365×115×85 |
OUTER BOX | 370×345×580 | 370×345×580 |
PACKING INFORMATION
1. 365×115×85MM INNER BOX 2. 370×345×580MM OUTER BOX *20 PCS / 1 OUTER BOX
INSTALLATION OR ASSEMBLY INSTRUCTIONS
PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.
importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.
“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”
1. PRODUCT SPECIFICATION:
| ASTRA 3W | ASTRA 12W |
NOMINAL VOLTAGE | AC100-240V | AC100-240V |
IP RATE | IP66 | IP66 |
EMERGENCY SYSTEM | NON-MAINTAINED | MAINTAINED |
2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.
3. INSTALLATION DRAWINGS
STEP 1: DRILL FOUR 6MM HOLES IN THE CEILING AND THEN PUT THE SETSCREW INTO THE HOLE.
STEP 2: TAKE OFF THE ENCLOSER.
STEP 3: OPEN THE GEAR TRAY, THEN INSTALL THE BASE ON THE CEILING.
STEP 4: INSTALL THE ENCLOSER ON THE BASE.
4. ELECTRICAL FAULT FINDING AND RELACEMENT:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING MUST BE DONE BY A FULLY QUALIFIED ELECTRICIAN AND, IF CARRIED OUT WITH THE LUMINAIRE IN PLACE, UNDER A PERMIT TO WORK. WITH REPLACEMENT OF ANY PART ENSURE THAT WIRES AND ConNECTIONS ARE CHECKED, AND ANY WIRE SLEEVING REFITTED.
